Xorg.0.log - Raspberry Pi 3
X.Org X Server 1.17.2
Release Date: 2015-06-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.8.11-2-ARCH armv7l Raspbian
Current Operating System: Linux raspberrypi 4.1.18-v7+ #846 SMP Thu Feb 25 14:22:53 GMT 2016 armv7l
Build Date: 11 January 2016 01:32:44PM
xorg-server 2:1.17.2-1+rpi1 ()
Current version of pixman: 0.33.3
Before reporting problems, check
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 4 22:43:57 2016
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) No Layout section. Using the first Screen section.
(==) No screen section available. Using defaults.
(**) |-->Screen "Default Screen Section" (0)
(**) | |-->Monitor ""
(==) No device specified for screen "Default Screen Section".
Using the first device section listed.
(**) | |-->Device "Allwinner A10/A13 FBDEV"
(==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Automatically adding GPU devices
(WW) The directory "/usr/share/fonts/X11/misc" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
(II) Loader magic: 0x54d93f00
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 19.0
X.Org XInput driver : 21.0
X.Org Server Extension : 9.0
(II) no primary bus or device found
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.17.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 9.0
(==) AIGLX enabled
(II) LoadModule: "fbturbo"
(II) Loading /usr/lib/xorg/modules/drivers/fbturbo_drv.so
(II) Module fbturbo: vendor="X.Org Foundation"
compiled for 1.17.2, module version = 0.5.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 19.0
(II) FBTURBO: driver for framebuffer: fbturbo
(++) using VT number 7
(WW) Falling back to old probe method for fbturbo
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/lib/xorg/modules/libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
compiled for 1.17.2, module version = 0.0.2
ABI class: X.Org Video Driver, version 19.0
(II) FBTURBO(0): using /dev/fb0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) FBTURBO(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
(==) FBTURBO(0): Depth 16, (==) framebuffer bpp 16
(==) FBTURBO(0): RGB weight 565
(==) FBTURBO(0): Default visual is TrueColor
(==) FBTURBO(0): Using gamma correction (1.0, 1.0, 1.0)
(II) FBTURBO(0): hardware: BCM2708 FB (video memory: 3505kB)
(**) FBTURBO(0): Option "fbdev" "/dev/fb0"
(**) FBTURBO(0): Option "SwapbuffersWait" "true"
(II) FBTURBO(0): processor: Unknown
(II) FBTURBO(0): checking modes against framebuffer device...
(II) FBTURBO(0): checking modes against monitor...
(--) FBTURBO(0): Virtual size is 1824x984 (pitch 1824)
(**) FBTURBO(0): Built-in mode "current"
(==) FBTURBO(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.17.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) FBTURBO(0): using backing store heuristics
(II) FBTURBO(0): can't load 'g2d_23' kernel module
(II) FBTURBO(0): failed to enable the use of sunxi display controller
(II) FBTURBO(0): No sunxi-g2d hardware detected (check /dev/disp and /dev/g2d)
(II) FBTURBO(0): G2D hardware acceleration can't be enabled
(II) FBTURBO(0): enabled fbdev copyarea acceleration
(==) FBTURBO(0): Backing store enabled
(==) FBTURBO(0): DPMS enabled
(II) FBTURBO(0): failed to enable hardware cursor
(II) FBTURBO(0): no 3D acceleration because the driver has been compiled without libUMP
(II) FBTURBO(0): if this is wrong and needs to be fixed, please check ./configure log
(==) RandR enabled
(II) SELinux: Disabled on system
(II) AIGLX: Screen 0 is not DRI2 capable
(EE) AIGLX: reverting to software rendering
(II) AIGLX: Loaded and initialized swrast
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event0)
(**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.17.2, module version = 2.9.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 21.0
(II) Using input driver 'evdev' for 'CHICONY USB Keyboard'
(**) CHICONY USB Keyboard: always reports core events
(**) evdev: CHICONY USB Keyboard: Device: "/dev/input/event0"
(--) evdev: CHICONY USB Keyboard: Vendor 0x4f2 Product 0x833
(--) evdev: CHICONY USB Keyboard: Found keys
(II) evdev: CHICONY USB Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.0/0003:04F2:0833.0001/input/input0/event0"
(II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 6)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device CHICONY USB Keyboard (/dev/input/event1)
(**) CHICONY USB Keyboard: Applying InputClass "evdev keyboard catchall"
(II) Using input driver 'evdev' for 'CHICONY USB Keyboard'
(**) CHICONY USB Keyboard: always reports core events
(**) evdev: CHICONY USB Keyboard: Device: "/dev/input/event1"
(--) evdev: CHICONY USB Keyboard: Vendor 0x4f2 Product 0x833
(--) evdev: CHICONY USB Keyboard: Found keys
(II) evdev: CHICONY USB Keyboard: Configuring as keyboard
(**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1:1.1/0003:04F2:0833.0002/input/input1/event1"
(II) XINPUT: Adding extended input device "CHICONY USB Keyboard" (type: KEYBOARD, id 7)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc105"
(**) Option "xkb_layout" "gb"
(II) config/udev: Adding input device SteelSeries Kinzu V2 Gaming Mouse (/dev/input/event2)
(**) SteelSeries Kinzu V2 Gaming Mouse: Applying InputClass "evdev pointer catchall"
(II) Using input driver 'evdev' for 'SteelSeries Kinzu V2 Gaming Mouse'
(**) SteelSeries Kinzu V2 Gaming Mouse: always reports core events
(**) evdev: SteelSeries Kinzu V2 Gaming Mouse: Device: "/dev/input/event2"
(--) evdev: SteelSeries Kinzu V2 Gaming Mouse: Vendor 0x1038 Product 0x1378
(--) evdev: SteelSeries Kinzu V2 Gaming Mouse: Found 12 mouse buttons
(--) evdev: SteelSeries Kinzu V2 Gaming Mouse: Found scroll wheel(s)
(--) evdev: SteelSeries Kinzu V2 Gaming Mouse: Found relative axes
(--) evdev: SteelSeries Kinzu V2 Gaming Mouse: Found x and y relative axes
(II) evdev: SteelSeries Kinzu V2 Gaming Mouse: Configuring as mouse
(II) evdev: SteelSeries Kinzu V2 Gaming Mouse: Adding scrollwheel support
(**) evdev: SteelSeries Kinzu V2 Gaming Mouse: YAxisMapping: buttons 4 and 5
(**) evdev: SteelSeries Kinzu V2 Gaming Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(**) Option "config_info" "udev:/sys/devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.1/0003:1038:1378.0004/input/input2/event2"
(II) XINPUT: Adding extended input device "SteelSeries Kinzu V2 Gaming Mouse" (type: MOUSE, id 8)
(II) evdev: SteelSeries Kinzu V2 Gaming Mouse: initialized for relative axes.
(**) SteelSeries Kinzu V2 Gaming Mouse: (accel) keeping acceleration scheme 1
(**) SteelSeries Kinzu V2 Gaming Mouse: (accel) acceleration profile 0
(**) SteelSeries Kinzu V2 Gaming Mouse: (accel) acceleration factor: 2.000
(**) SteelSeries Kinzu V2 Gaming Mouse: (accel) acceleration threshold: 4
(II) config/udev: Adding input device SteelSeries Kinzu V2 Gaming Mouse (/dev/input/mouse0)
(II) No input driver specified, ignoring this device.
(II) This device may have been added with another device file.